As the need to meet growing data demands and faster data speeds increases, so does the requirement of a wide variety of passive optical interconnect solutions. These passive connectivity solutions need to be highly reliable, flexible and ensure compatibility across various networks. In this regard, our passive connectivity solutions complement our expertise in optical fiber cables to provide high quality end-to-end telecom solutions. Our portfolio of passive components comprises termination and distribution cabinets, joint closures, splitters and aerial cable accessories that cater to various types of telecom and defence networks.

FDP-Rack Mount

Fiber Distribution Panel (FDP)- Rack Mount

Fiber Distribution Panels – Rack Mount are panels that are used to provide cable interconnections between communication facilities, which can integrate fiber splicing, fiber termination, fiber optic adapters & connectors and cable connections together in a single unit. It can also work as a protective device to protect fiber optic connections from damage.

  • FTTH access network
  • Telecommunication network
  • Data communication network
  • CATV applications
  • Finished in standard colors of off white/ white
  • Splice & storage of individual tube / bundle of fibers
  • Inter-rack and intra-rack connection
  • Arrangement to terminate Aramid Yarn units possible
  • Possible to fix the ODF with mounting screws and nuts
  • Constructed from CRCA & Plastic material
  • Front, on internal slider, sliding outward with self-locking arrangement
  • Different adaptor Panel suitable for FC,SC,LC
  • Front mounting in 12"/19" Rack
  • Both Ribbon and Loose Fiber Option
Fiber Options 12F/24F/48F/96F/144F/288F
Connector Options LCPC/SCPC/LCAPC/SCAPC/FCPC
Dimensions(H x W x D)
12F- 44.45 x 482 x 300 (Approx Weight- 3 Kg)
24F- 44.45 x 482 x 300 (Approx Weight- 3.5 Kg)
48F- 44.45 x 482 x 300 (Approx Weight- 4 Kg)
96F- 88.9 x 482 x 300 (Approx Weight- 5 Kg)
144F- 133 x 482 x 300 (Approx Weight- 5.5 Kg)
288F- 267 x 482 x 300 (Approx Weight- 7 Kg)
Downloads
Heat Shrink Joint Closure
Mechanical Joint Closure
Flat Joint Closure

Joint Closures

Joint closures are designed for use with any cable construction in any environment and for numerous splice applications. Typically, fiber optic splice closures come in 2 types- horizontal and vertical. Horizontal type fiber closures are either flat or cylindrical case and are the ones used in mounted aerials or buried underground. As they are commonly made of high tensile construction plastic, they have good adaptability and compression resistance. On the other hand, a vertical fiber optic closure looks like a dome and is easy to be buried, though it can be used above the ground as well. Dome fiber optic splice closures usually require high-level seals and waterproof technology due to their underground applications. The various types of closures offered by us as part of this portfolio include heat shrink joint closures, mechanical joint closures and flat joint closures.

Applications

  • Telecommunication networks
  • Data communication networks
  • Outdoor applications
  • Duct, Aerial & Wall mounting

Portfolio

Heat Shrink Joint Closure

Heat Shrink Joint Closures are used to house optical fiber cables and splices in secured condition. They are compact, light-weight and user-friendly. They are designed for use with any cable construction (Loose Buffer Tube, Central Core Tube, Loose Fiber, Ribbon) in any environment (aerial, pedestal, buried, hand-hole, manhole) and for numerous splice applications (expressed, tap-off, branch and repair).

  • Telecommunication networks
  • Passive Optical Networks and fiber communication systems
  • Aerial & underground applications
  • Wall-mounting, pole-mounting and duct-mounting applications
Fiber Capacity 12F/24F/48F/96F/144F
Dimensions 530 mm X 220 mm
Cable Ports 4 nos. round & 1 nos. oval
Type of Systems Dome Type & Base Type
Material ABS & PP
Dome & Base Sealing C Clamp Provisioned
Splice Capacity 12 fibers/tray
  • Compatible for fibers 12F-144F
  • Variants include straight joint closure, flat joint closure and outdoor joint closure
  • Chemical and UV resistant
  • Ribbed structure with provision for aerial mounting brackets
  • IP68 sealing protection

Downloads

Product Brochure for DataFly

Optical Splitters

Optical Splitters

Splitter modules are widely known for their plug-and-play functionality. Optical splitters are based on planar light wave circuit technology and high precision alignment. They can split or combine light from one or two fibers into N outgoing fibers uniformly over a wide spectral range with ultra-low insertion loss and low polarization dependent loss.

Applications

  • FTTH access networks
  • Telecommunication networks
  • Data communication networks
  • CATV applications

Salient Features

  • Wide operating temperature range with low Insertion loss & low PDL
  • Ultra broadband performance (1260-1650 nm)
  • Tested for FTTH optical high power levels (analog video transmission)
  • Factory terminated and 100% tested for Insertion loss and Return loss
  • Customized packaging & configuration

Key Specifications

Splitter 1X2 1X4 1X8 1x16 1x32 1x64 1x128 2x2 2x4 2x8 2x16 2x32 2x64 2x128
Insertion loss maximum (dB) 4 7.1 10.5 13.8 17.1 20.5 25.5 4.2 7.4 11 14.6 17.8 21.5 26
Uniformity maximum (dB) 0.3 0.5 0.8 1 1.5 2 2.6 1.1 1.2 1.6 2.2 2.4 2.8 3
PDL(dB) < 0.2 < 0.2 < 0.2 < 0.2 < 0.3 < 0.5 < 0.8 < 0.2 < 0.2 < 0.2 < 0.2 < 0.3 < 0.5 < 0.8
Operating wavelength (dB) 1310 & 1550 nm
Return loss (dB) >55 for PC , >60 For APC
Directivity (dB) >55
Fiber type
Single mode fiber
G.652D & G.657A compliant
Operating temperature(°C) -40 to +85
Aerial Accessories

Aerial Accessories

We provide a complete product range of aerial cable accessories for application in suspension assembly and terminating assembly.

Suspension Assembly

Helically formed suspension fittings along with the elastometer pad inserts strapped by a galvanized steel eye-band is used to hang from the twisted eye link connected to a pole mounted stay clamp or on the tension hook (J-shaped) installed on the C-bracket at the intermediate poles.

Termination Assembly

These fittings are used at tension/terminating poles (dead end poles) or poles where splices are located and the poles where the overhead alignment takes a turn, (angle exceeding more than 15 degrees)

Applications

  • Ethernet Networks
  • High precision guide pins
  • Premise Installation
  • Data Processing Networks
  • Telecommunication Networks

Technical Diagram

Suspension Assembly
Terminating Assembly

Features

  • Fittings and accessories designed for a life of 25 years
  • Fixtures and accessories shall not result in any physical damage or change in attenuation and other optical parameters under various environmental conditions during operation
  • All bolts, fasteners and shackles material designed with a minimum safety factor of 2.5 and conform to IS-1367 Part 3, Steel Grade 4.6